Sangean DMS-37BT Spécifications Page 9

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 56
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 8
8
GB
Connect the speaker system
1. Extend the speaker wires and connect to the speaker output L and R.
NOTE:
On the supplied wires, the copper wires is dened as Positive in polarity
while the tin plated wire is Negative in polarity
2. Make sure the Channel (L and R) and also polarity (+ and -) are all
correctly connected.
IMPORTANT:
Do not switch on the power until the speaker system is connected.
Using the touch panel
The DMS-37BT sound system has a stylish touch panel instead of
conventional buttons.
To operate the buttons simply touch the button area with the tip of a
finger for about half a second. Sleep function and Bluetooth paring
function marked with a dot (●) are accessed by means of a long touch
(2-3 seconds) on the appropriate button until the display on the sound
system shows that the command has been accepted.
You may find that at first, the sound system does not always detect
that you have touched a button. If so, try touching with a little more
pressure, or for slightly longer. You will soon find the optimum touch
needed to control your sound system. (See also the section of” Touch
Panel Sensitivity Control”)
The panel may be cleaned using a dry cloth. Do not use abrasives,
cleaning uids or solvents.
Remote control functions
Most of the functions of the DMS-37BT sound system can be controlled
using either the touch panel or the remote control.
However, there are a few functions which are only accessible using the
remote control. These are:
DAB / FM radio station presets DAB / FM auto-tune
DAB menu function CD / USB / SD CARD track access
by numbers
CD / USB / SD CARD random
track control
Audio mute
As with the front panel, some operations require a longer operation
of the button (explained in the relevant sections). In this case simply
keep your nger held on the remote control button for 2-3 seconds until
the display on the sound system shows that the command has been
accepted.
Vue de la page 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 55 56

Commentaires sur ces manuels

Pas de commentaire