Sangean U1 (R1) Manuel d'utilisateur télécharger pdf (Page 8)

Power the radio

1. Battery operation

Installing the batteries, first turn battery cover fixture anti-clockwise to

loosen and put down the battery cover. Insert 6 x D size ( UM-1 )

battery into the compartment. Ensure the battery is inserted in

accordance with the diagram shown.

Close the battery cover and fasten the fixture by turning clockwise.

If the radio is not to be used for any extended period of time, it is

recommended that the battery is removed from the radio.

2. AC operation

Before you plug the AC cord into the AC socket, be sure the voltage

is correct. If you have batteries in the radio and use the AC power

cord , the batteries will automatically be disconnected.

Switch the “Open” to the AC cord compartment to OPEN position,

pull back the compartment door and cylinder of the AC cord storage,

pull out the AC cord to get the required length to the AC socket.

You can store the AC cord after use in the opposite way you pull out

the AC cord.

3. Powered via DC IN socket

The radio can be also powered via the DC IN socket which can allow

9-14 Volt DC. which is designed to be powered by the vehicle or the

boat so you can take the radio with you outdoors or on the boat.

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Sangean U1 (R1) Manuel d'utilisateur Page 8